Brookside Gates
Timm Residence
ZLX24 · RGSM-1NCE · DIR10
ONLINERemote accessUpdated just now
OPEN · BOTH SENSORS CLEAR
System online and ready
LIVE GATE CAMERA · D13
● LIVE
Connecting to Hikvision D13…
Hikvision · D13 · Full Frame HLS · 1302
Tap picture for full screen
Gate position
OPEN
Both leaves fully open
OPEN
Opening position100%
Safety sensors
CX
DIR10 photocell 1
CLEAR
Safety input
CY
DIR10 photocell 2
CLEAR
Safety input
Safety beam blocked — check driveway before operating the gates.
SAFETY ACTIVE — Close command temporarily disabled.
Control gate
Engineer Override — Open Only
Use only after visually checking the driveway is clear. Press and hold for 1.5 seconds. This sends a normal OPEN command; it does not disable the CAME controller's physical safety inputs.
Press and hold for 1.5 seconds · every use is logged
HOLD OPEN
Hold-open active
Secure remote gate control
Recent activity
0 events
Fault log
No faults recorded
0
System fault history is stored on the Brookside Gates PC.
App status
Waiting for CAME connector...
Version 8.6.4 · Gate Columns Colour by Position
PC connector
Start the CAME connector on this PC to enable live status and gate controls.
This Windows PC can be the permanent host. Keep the connector running and publish the dashboard through authenticated HTTPS for safe access from your iPhone over 5G. Do not expose the raw control port directly.
Full history
No activity recorded yet.
Fault log
Stored on the Brookside Gates PC
No faults recorded.
Settings
Confirm gate commands
Ask before Open, Close, Pedestrian or Stop.
Gate-left-open warning
Show an alert when the gate remains open.
Warning delay
How long before the open-gate warning appears.
Appearance
Automatic switches between daytime and nighttime.
Refresh rate
How often the app asks CAME for live status.
System health
CAME Cloud
ONLINE
Last update
NOW
Gate position
100%
Safety
CLEAR